Macsense Connectivity MIH-120 Manual de usuario descargar pdf (Pagina 15)

every client which needs Internet access through the XRouter Aero.

6. After specifying the settings of TCP/IP click OK and restart Windows to allow

the settings to take effect.

7. Repeat steps from 1 to 6 for each client PC on you Local Area Network.

When all of your client PCs are configured, please go to Chapter 6 to set up

your Aero XRouter.

5.1.1 Assigning TCP/IP Values Manually

If you already have a DHCP server on the network, or if you prefer not to use the

XRouter Aero’s DHCP server to assign TCP/IP values automatically, you can

input these values manually. To manage a computer’s address manually, perform

the following steps:

Click the IP Address tab from the TCP/IP properties window.

1. Select the item Specify an IP address to manually input unique IP address

and Subnet Mask. Do this for every client which needs Internet access

through the XRouter Aero. (See Figure 9)

2. In the IP Address field enter “192.168.1.x” where x is any variable of your

choice ranging from 2 to 253. Enter “255.255.255.0” in the Subnet Mask

field.

NOTE: No two computers on the LAN are allowed to adopt the same IP address

or an IP address conflict will occur.

Figure 9

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

Sin comentarios

Macsense Connectivity MIH-120 Manual de usuario Pagina 15