Macsense Connectivity MIH-120 Manual de usuario Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 56
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
Fragmentation Threshold: This value represents the allocated resources for
recovering packet loss. Changes to this value should only be made by an
experienced network technician and even then in small modifications.
The Wired Equivalent Privacy (WEP) is an IEEE 802.11 standard that acts as a
data privacy feature based on a 40 bit shared key algorithm. To provide WEP
encryption security, all stations on the network must have WEP enabled and set to
the exact same WEP Key.
Figure 32
WEP Key Activation:
To activate, choose the pull down menu and select WEP40 or Optional WEP40. If
you do not wish to implement WEP security on your network, leave it on the
default Disable. (See Figure 32)
WEP40 implements a 40-bit shared key for encryption security purposes. This
will encrypt the frame only.
Optional WEP40 identifies and accepts both encrypted and non-encrypted
frame. The router will communicate in the same mode as the packets were
received.
The unique encryption key can be entered into either the ASCII (max. 5
characters) or the HEX (max. 10 characters) field, but not
both. As HEX is also
capable of using some characters in the string that ASCII cannot use, we
suggest using a HEX string for the best encryption needs.
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 55 56

Comentarios a estos manuales

Sin comentarios